A Large Variety of Desktop E-Nail Kits, Portable E-Nails, Quartz Nails, Titanium Nails, and Accessories. One Year Warranty, Ships in 24 Hours. 710 your life!

Discount E-Nails

Dabbing

Vaping

Smoking

LTQ Vapor Rosin Press Machine KP-2

The LTQ Vapor Rosin Press Machine KP-2 is an innovative Rosin Press Machine, which is used for producing wax/concentrate by yourself. You just need to wrap the flower body with baking paper and put it in the middle of the heating plate. Press the handle several times to squeeze the upper and lower heating plates into place. Stop for 30 seconds and then wait for wax/concentrates. The LTQ Vapor Rosin Press Machine KP-1 also provide temperature control functions. The heating tube will automatically heat to the set temperature. The recommended temperature is 220℉. Just get one to enjoy DIY fun!

Parameters
Machine Size:108mm x 145mm x 274mm
Using voltage:90-120V, 220-240V
Machine power:100W
Plate size: 80mm x 80mm

Includes:

    1 x Rosin press machine(KP-2) 
    1 x Power cable
    1 x Stainless steel dab tool(A)
    2 x Sticker
    10 x Baking paper  
    1x Wrench tool 
    1 x Silicone container
    1 x User manual
    4 x Magnetic absorption

https://discountenails.com/

LTQ Vapor Rosin Press Machine KP-2

The LTQ Vapor Rosin Press Machine KP-2 is an innovative Rosin Press Machine, which is used for producing wax/concentrate by yourself

Fancier XL 25mm Quartz Banger E-Nail Kit
Nail: 4 in 1 Quartz Banger Nail and Adapter
Case Colors: Camouflage or Black Carbon Fiber

*Reaches 710 degrees in about 3 minutes*
*Temperature range is 0-999 degrees*

 

Every Kit Includes:

1x PID temperature controller Box

1x coil (25MM Only)

1x AC power cable(1.5m)

1x 25MM Quartz Nail (14&18MM Male Joint)

1x Quartz Carb Cap

1x Glass Adapter(14&18MM Female)

2x Silicone containers

1x Zipper Case

1x User Manual

 

 The quartz nail is both a 14MM and 18MM male joint in one

the glass adapter is a 14MM and 18MM female joint in one.

So every E-Nail kits quartz nail is a 4 in 1 and can fit for both 14MM & 18MM female and fale joints.

(Fits most all rigs!)

 
Fancier E-Nail Specifications:
Brand Name 	Fancier
Key Words 	Fancier Nail, Fancier E Nail, Fancier Nail
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature~999 Degrees °F
Temperature stability 	Approximately 5°F-7°F
Quartz Nail with Adapter Joints: 	14MM Male, 18MM Male, 14MM Female, 18MM Female Joints 4 in 1
Coil Shape 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	  3.5 x 1.5 x 5.0 inch (93x37x129mm)

https://discountenails.com/

Fancier XL 25mm Quartz Banger E-Nail Kit

 Fancier XL 25mm Quartz Banger E-Nail Kit Nail: 4 in 1 Quartz Banger Nail and Adapter Case Colors: Camouflage or Black Carbon Fiber

Kanboro Tech Sub Dab Pro

 
The Kanboro Tech Subdab Pro Portable e-nail is the higher end big brother to the Subdab Portable e-nail. The Subdab Pro Portable e-nail features a removable 2500 mAh 18650 battery with Micro USB charging which should give you between 35 and 50 uses per full charge. There is a replaceable ceramic cup atomizer to hold your full melt concentrates. The unit comes with a 14mm or 18mm adapter to use with your favorite glass water pipe.


Features & Specifications
Battery: 2500 mAh Removable 18650 Battery
3 Click Turn On/Off
3 Seconds to 400°F, 10 Seconds to 600°F
14 and 18mm Water Pipe Adapter Included
Pure Ceramic Nail For Quick Heating and Clean Taste


1) Subdab is a 2 in 1 portable and water pipe e-nail vaporizer. It can be used alone or with a water pipe bong.
2) Easy to use, portable, durable and powerful. It is small enough to take anywhere, and durable enough to use on the largest water pipes.
3) Heats up in only 3 seconds to 400F, and 10 seconds to 600F, allowing for the best dab conditions.

https://discountenails.com/

Kanboro Tech Sub Dab Pro

Menovo Devil E-Nail Box Kit

Coil Sizes: 16mm/20mm

Nail Models: Titanium / Quartz Hybrid.

(Bottom of Nails are 6 in 1 rig fitment- 10mm,14mm,18mm male and female)

 

Specifications:

Size 97*77*141mm

Material: Metal E-nail Controller Box

Color: Orange Devil Design

Heating coil size:10mm/16mm/20mm

Power:100W

Voltage:110V

Weight:1.46KG

Temperature:0~999 degree C

Company: Menovo

 

Professional parameters

Resistance Wire:Ni Cr 80-20

Wattage Tolerance:+ 10%

Resistance Tolerance:+ 10%

Insulation:> 5 M W

Unheated Length: 35mm (Standard)

Thermocouple: K type

Die Electrical Strength:800V A/C

Maximum Sheath Temperature: Nine hundred and ninety-nine Degrees C

 

Package Includes:

l 1x Menovo Devil E-nail Controller

l 1x Titanium or Hybrid Ti/Quartz Nail

l 1 x Carb Cab & Removable Dab Tool

l 1x Power Cord

l 1x Heat Coil/16mm or 20mm

l 1x User Manual

l 1x Elegant Box

l 2x Silicone Containers

l 1 Remote Control

https://discountenails.com/

Menovo Devil E-Nail Kit

Menovo Devil E-Nail Box Kit  Coil Sizes: 16mm/20mm  Nail Models: Titanium / Quartz Hybrid

Crossing Core E-Rig Kit
Features:
(1):Cost effective
(2):More coil selections
(3):Unique coil design
(4):USB-C and fast charge
(5):Removeable Silicone sleeve
 
Thank you for choosing the CORE, here are some tips to help you get started .
 
On / Off 
- Click power button 5 times to turn on/off the device. When the device is turned on, the light will show your battery level Green/Full, White/Medium, Blue/Low, Red/Very Low.
 
Changing Heat Settings:
- Click power button 3 times to change heat settings. Low/Red, Medium/Blue, Medium High/White, High/Green as illustrated on manual.
 
How to use:

   Fill the glass bubbler through the mouthpiece with water. 
   Place desired concentrate on the coil of your choice and cover the coil with provided glass carb cap as needed. 
   Power on the device and select the desired modes. 
   Gently enjoy your vaping experience. 
 
Triple Titanium Coil with Black Ceramic:
 -For a long session,click power button 2 times to engage pre heat,the device will vibrate when ready  for use.After 60 seconds the devices heating cycle will time out.
 
- For a short session, pulse power button 8-10 seconds for several cycles. The device has a  15 seconds time out warning when you hold the power button down.
 
ONLY USE RED AND BLUE FOR TRIPLE TITANIUM COIL!
 
 
Quartz Bucket or Titanium Bucket Coil
 
-Click power button 2 times to engage pre heat, the device will vibrate when ready for use. To extend heat sessions hold power down to heat the CORE 8-10 seconds for several cycles.
 
ONLY USE WHITE AND GREEN FOR QUARTZ BUCKET OR TITANIUM BUCKET COIL!
 
How to clean:
 
- Use cotton swabs to clean the Quartz bucket or Titanium bucket each session. Clean the CORE base and air pathway when maintenance is required.
       
- Simply soak the whole coil in a cup with ISO and dry the coil before use. The bucket needs to be taken out when cleaning the Quartz Bucket or Titanium Bucket coil.
 
Charging:  
 
- Plug the USB-C cable into charging port and connect to provided charging brick for fast charge, it
requires approximately 1 hour 45 minutes to fully charge.                                                                 
 
- Light will flash red while charging and solid red when done.
 
All CORE coils are compatible with the Sai Plus Atomizers.
 
Package Contents:
1 Core e-rig
1 Triple Titanium & black ceramic rod coil
1 Quartz bucket coil
1 Titanium bucket coil
1 USB cable
1 Fast charger adapter
1 Dab tool type A
5 Q Tips
2 alcohol swab
1 5ml silicone container
1 carry case
1 gift box

https://discountenails.com/

Crossing Core E-Rig Kit

Click power button 3 times to change heat settings. Low/Red, Medium/Blue, Medium High/White, High/Green 

Titanium Replacement Nail

Choose size 20mm/16mm/10mm above
(this is the coil size where it attached to the nail)

-Factory Certified Grade 2 Titanium
-6 in 1 fitment for 10/14/18mm male and female rigs
-Fits most all rigs

https://discountenails.com/

Titanium Nail

SB Three Chamber Recycler Rig

 Features a removable mouth piece for easy cleaning
Size: 13.8 Inches Tall
Joint Type: 14mm male
Included Accessories: Glass Bowl (for flower)

https://discountenails.com/

SB Three Chamber Recycler Rig

Vapor Time Pure Quartz Diamond Knot Nail For 16mm/20mm Coils
Overall the diamond knot is one of the most efficient nails. The sleek & elegant design can even be used with no carb cap. It Features more heating surface!
Nail Size:
outer diameter- 15.6mm to fit 16mm coils and 19.6mm to fit 19.8 or 20mm coils
Rig joint size options:
10mm,14mm,18mm male or female
(choose all options above)

https://discountenails.com/

Vapor Time Diamond Knot Quartz Nail

Long Recycler Inline Percolator Rig

 
Specifications:
Height: 15inches
Joint Size: 14mm Male
Thickness: 4mm
Weight: 13 Ounces
Included Extras: Bowl/Dome/Nail

https://discountenails.com/

Long Recycler Inline Percolator Rig

Vaportime Oddly 969 Oil Rig Beaker

 
Size: 6.75 Inches Tall
Joint Type: 14mm Female
Material: High Borosilicate Glass

https://discountenails.com/

Vaportime Oddly 969 Oil Rig Beaker

SB Tall Faberge Recycler Rig

 
Size: 11.8 Inches Tall
Joint Type: Female 18mm
Included Accessories: Quartz Banger Nail (for torches)

https://discountenails.com/

SB Tall Faberge Recycler Rig

Fancier 25mm Axial Style Quartz Banger Nail
-Made for the axial style coil-

 
Includes:
1x Quartz Banger Nail
1x Metal Pin (to secure to coil)

 
Joint Sizes: 10mm, 14mm, 18mm
Joint Types: Male, Female

 
NOTE: Axial Coil is sold separately here:
https://discountenails.com/collections/accessories/products/5-pin-kevlar-coil?variant=32353538605131

Fancier 25mm Axial Style Quartz Banger Nail

Beracky Glass Drop Down Adapter


Features:
N Style & S Style
Adapter Joint: 14mm Male and Female
Adapter Features: Straight and Parallel Joint
Material: Glass
Drop down adapters keep your rig cleaner and are easy to clean themselves.
They also moves the coil away from the mouth piece on an e-nail setup.

https://discountenails.com/

Beracky Glass Drop Down Adapter

Crossing 30mm Quartz Banger Nail Kit

 
This quartz banger fits the crossing 30mm coil
Joint size: 14mm Male
Includes:
1x 30mm Opaque Joint Quartz Nail
1x Bowl Insert
1x Carb Cap
1x Pin Coil-Nail Fastener
*NOTE: Crossing 30mm Coil Sold Separately*

https://discountenails.com/

Crossing 30mm Quartz Banger Nail Kit

Crossing Core 2.1 E-Rig Kit  

The Crossing Core 2.1 is a significant upgrade over the Crossing Core 2.0 in several key areas. Firstly, the Core 2.1 features a more powerful 3150mAh battery, providing longer and more consistent performance compared to the Core 2.0. This means that you won't have to worry about running out of power during your dabbing sessions.
 


Non Rebuildable 3D Atomizer

The Core 2.1 features a non rebuildable 3D atomizer which will provide a much higher overall quality. It also removes the need for the tools required to dismantle and put together the Atomizer. Shenzhen Crossing understood that most consumers look for relaxation when vaporizing and the extra rebuild step is simply not worth it. They've been designed for people who aren't comfortable rebuilding their setups. Simply unscrew the old and screw in the new!

* Direct Heat from the Ceramic Bucket
* Ceramic and Stainless Steel Build
* Larger Vapor and Better Taste
* Quicker Warm-up
* Exchangeable

Another major improvement in the Core 2.1 is its precision temperature control system, which allows you to set your desired temperature with greater accuracy. The newest version features 4 temperature settings that are indicated by a color. This results in a much more consistent and enjoyable dabbing experience, as you are able to fine-tune the temperature for your specific concentrates and oils.


Here are the major key differences between the Core and Core 2.1 e-rigs which are as follows: 
 
Core 2.1 runs a rock solid nonrebuildable 3D atomizer, no wire based coils 
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design 
larger 3150mAh battery
Four heat settings are now all for the 2.1 3D atomizer 
Decreased pre-heat time 
Increased session time 
Increased total run time (80 second full run time) 
Improved button function 
 
 
Core 2.1 Features:
 
One button functionality for ease of use 
Fully heated high polish ceramic vaping surface – elements inside base and walls of heater 
Non-Rebuildable atomizer 
Vortex Airflow – Aluminum spinner carb cap with carb cap tether 
Borosilicate Glass Bubbler 
Stainless Steel Carb Cap Tube 
Four carefully tuned heat settings 
Isolated Aluminum and Glass Vapor Pathway 
Low maintenance 
Approx. 1 hour 45 minute charging time 
3150mah Li-Ion Battery Pack. 
 
 
What’s Included:
 
Core 2.1 E-rig Base 
Core Bubbler 
Aluminum Spinner Carb Cap (based on our design) 
Carb Cap Tether (black) 
Silicone Base Cover/Sleeve (black) 
2.1 3D Atomizer
SS316 Dab Tool (based on our design) 
2 x Spare Carb Cap Tube O-rings 
1 x Wall Plug – US inside – UK included for UK orders 
1 x USB-C Charging Cable 
Cotton buds/Q-tips 
Alcohol wipes 
Upgraded Carry Case 
 
 
Button Functions:
 
Hold – Manual fire up to 60 seconds 
Two clicks – Activate session mode – One click to cancel 
Three Clicks – Change heat setting 
Four Click – Display power level – Red/Low – White/Medium – Green/Full 
Five Clicks – Lock or unlock Core 2.1 Base 
 
 
Sessions times and temperatures 
 
The total session time for the Core 2.1 has been upgraded to 80 seconds, this includes the pre-heat time. 
 
Blue – 12.5 second pre-heat – Approx. 205°C
Green – 13 second pre-heat – Approx. 220° 
White – 17.5 second pre-heat – Approx. 240° 
Red – 22.5 second pre-heat – Approx. 260° 
 
 
Setup 
 
Charge your base using the provided wall plug and cable. 
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top. 

Place bubbler onto Core 2.1 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.1 base, then gently and firmly push it straight down into place. 

Check small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.1 base. 

Place the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that you can load concentrate onto the heater. 
Select your desired heat setting (start low if you’re not sure). 

Now that’s all done we get onto the vaping methods as there are different ways the Core 2.1 can be used! 
 
 
Methods of Use 
 
Cold Starts – This method is best for getting the most flavor and material preservation as you start using as soon as vapor is being produced. Using it in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed. You can start your session at any point, we suggest keeping an eye on the button flashes so that you can always begin after a set number of flashes, if desired, providing a very consistent and repeatable experience. 
 
Load material into the heater 
Press the fire button twice to activate session mode 
When your concentrate starts to bubble begin using gently with the carb cap left off 
When the Core 2.1 base vibrates place the carb cap back on and continue your use as you normally would 
For subsequent sessions just use as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session 
If you still have material left inside at the end of the session simple hit the fire button twice again and start using immediately, no need to wait for the vibrate as your heater will already be close to adequate temperature. The second session will always run a little hotter than the first if it is started straight after 
Hot Starts –  This way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum cloud production and effects as quickly as possible. 
 
Press the power button twice to activate session mode 
Load your material onto your dab tool – rice size 
Wait for the Core 2.1 base to vibrate indicating the session temperature has been reached 

While using gently load the dab into the heater, then replace the carb cap and use as your normally would

For subsequent sessions you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again! 

As with cold starts, follow up sessions will always run a little hotter. 
Manual – Self explanatory, load a small rice size dab into the heater and hold down the power button. Use as desired. 
 
Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning. 
 
 
 
Cleaning 
 
Wipe out heater with a Q-tip after each use 
Clean the area around the RDA heater weekly to stop residue building up 
Every month or so wipe out the airway with a Q-tip soaked in ISO – allow to fully dry before use 
Replace bubbler water daily 
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking. 
 
 
Safety Features 
 
Over-charge 
Over-discharge/Low battery 
Over-heat 
Low heater resistance 
Short-circuit 
No atomizer 
 
 
Certifications 
 
CE Certified 
ROHS Certified Materials 
FCC Certification 
FDA Approved Silicone 
UN 38.3 Certified Li-Ion Battery Pack. 
Warning Lights – When your Core 2.1 base flashes three times it’s trying to tell you something… 
 
Blue – Short-circuit warning 
Green – No atomizer warning 
White – Over-heat warning 
Red – Low battery warning 
  
Warranty information 
 
For all warranty claims please contact the store you purchased from. 
The Core 2.1 power base is covered by a one year manufacturer warranty against defects. 
The Core 2.1 carry case is covered by a one year manufacturer warranty against defects. 
The atomizer is covered by a one week manufacturer warranty against defects. 
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer. 

Crossing Core 2.1 E-Rig Kit

Crossing Core 2.0 | 2.1 Stargazer Side-Mouthpiece Bubbler E-Rig Kit
Model Choice: 2.0 or 2.1

The one you've been waiting for... Core 2.0 e-rig with a black silicone sleeve and carb tether, 4-port spinner carb cap and V5 Heater!! 
When heater housing design and art combines! Meet the new rebuildable ceramic coil for the Core 2.0 E-Rig. The RDA V5 Ceramic Heater works on the original Core also. The original Core coil atomizers work on the Core 2.0 too! 
  
There are a some key differences between the Core and Core 2.0 e-rigs which are as follows: 
 
Core 2.0 runs V5 heaters, no wire based coils 
Atomizers contain only Metal and Ceramic, silicone and PEEK has been replaced with an all ceramic design 
Four heat settings are now all for the V5 heaters 
Fully rebuildable atomizers – no need to replace the whole housing, just the heater 
Decreased pre-heat time 
Increased session time 
Increased total run time (80 second full run time) 
Vortex airflow – included spinner carb cap 
“Unbreakable” aluminum carb cap replaces glass bubble carb 
Improved button function 
Upgraded Stainless Steel Carb Cap Tube 
 
 
Features 
 
One button functionality for ease of use 
Fully heated high polish ceramic vaping surface – elements inside base and walls of heater 
Rebuildable atomizer 
Vortex Airflow – Aluminum spinner carb cap with carb cap tether 
Borosilicate Glass Bubbler 
Stainless Steel Carb Cap Tube 
Four carefully tuned heat settings 
Isolated Aluminum and Glass Vapor Pathway 
Low maintenance 
Approx. 1 hour 45 minute charging time 
3150mah Li-Ion Battery Pack. 
 
 
What’s Included 
 
Core 2.0 E-rig Base 
Core Stargazer Side-Mouthpiece Bubbler 
Aluminum Spinner Carb Cap (based on our design) 
Carb Cap Tether (black) 
Silicone Base Cover/Sleeve (black) 
Atomizer with V5 heater installed 
Spare V5 Heater 
SS316 Dab Tool (based on our design) 
4 x Spare Atomizer Screws 
Screwdriver 
2 x Spare Carb Cap Tube O-rings 
1 x Wall Plug
1 x USB-C Charging Cable 
Cotton buds/Q-tips 
Alcohol wipes 
Upgraded Carry Case 

-(No factory glass bubbler included)-
 
 
Button Functions 
 
Hold – Manual fire up to 60 seconds 
Two clicks – Activate session mode – One click to cancel 
Three Clicks – Change heat setting 
Four Click – Display power level – Red/Low – White/Medium – Green/Full 
Five Clicks – Lock or unlock Core 2.0 Base 
 
 
Sessions times and temperatures 
 
The total session time for the Core 2.0 has been upgraded to 80 seconds, this includes the pre-heat time. 
 
Blue – 12.5 second pre-heat – Approx. 400° 
Green – 13 second pre-heat – Approx. 425° 
White – 17.5 second pre-heat – Approx. 465° 
Red – 22.5 second pre-heat – Approx. 500° 
 
 
Setup 
 
Charge your base using the provided wall plug and cable. 
Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away and that no water has flooded into the bottom compartment. If this happens turn the bubbler upside down and blow into the air hole at the bottom to clear this section. Then re-fill from the top. 

Place bubbler onto Core 2.0 Base at an angle, ensuring that the hole in the bubbler base aligns with the vapor pathway in the Core 2.0 base, then gently and firmly push it straight down into place. 

Check small screws in the atomizer base which hold the heater legs are done up fully. These need to be tightened so they are firm, but not so much that they cut the wire legs off the heater. When this is done screw the atomizer into the Core 2.0 base. 

Place the carb cap tube on the base so that the wider angled side sits at the top, leaving the carp cab on the tether so that you can load concentrate onto the heater. 
Select your desired heat setting (start low if you’re not sure). 

Now that’s all done we get onto the vaping methods as there are different ways the Core 2.0 can be used! 
 
 
Methods of Use 
 
Cold Starts – This method is best for getting the most flavor and material preservation as you start using as soon as vapor is being produced. Using it in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed. You can start your session at any point, we suggest keeping an eye on the button flashes so that you can always begin after a set number of flashes, if desired, providing a very consistent and repeatable experience. 
 
Load material into the heater 
Press the fire button twice to activate session mode 
When your concentrate starts to bubble begin using gently with the carb cap left off 
When the Core 2.0 base vibrates place the carb cap back on and continue your use as you normally would 
For subsequent sessions just use as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session 
If you still have material left inside at the end of the session simple hit the fire button twice again and start using immediately, no need to wait for the vibrate as your heater will already be close to adequate temperature. The second session will always run a little hotter than the first if it is started straight after 
Hot Starts –  This way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum cloud production and effects as quickly as possible. 
 
Press the power button twice to activate session mode 
Load your material onto your dab tool – rice size 
Wait for the Core 2.0 base to vibrate indicating the session temperature has been reached 

While using gently load the dab into the heater, then replace the carb cap and use as your normally would

For subsequent sessions you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again! 

As with cold starts, follow up sessions will always run a little hotter. 
Manual – Self explanatory, load a small rice size dab into the heater and hold down the power button. Use as desired. 
 
Manual hold can also be used instead of double pressing to finish a session or heat the heater for easier cleaning. 
 
 
 
Cleaning 
 
Wipe out heater with a Q-tip after each use 
Clean the area around the RDA heater weekly to stop residue building up 
Every month or so wipe out the airway with a Q-tip soaked in ISO – allow to fully dry before use 
Replace bubbler water daily 
To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking. 
 
 
Safety Features 
 
Over-charge 
Over-discharge/Low battery 
Over-heat 
Low heater resistance 
Short-circuit 
No atomizer 
 
 
Certifications 
 
CE Certified 
ROHS Certified Materials 
FCC Certification 
FDA Approved Silicone 
UN 38.3 Certified Li-Ion Battery Pack. 
Warning Lights – When your Core 2.0 base flashes three times it’s trying to tell you something… 
 
Blue – Short-circuit warning 
Green – No atomizer warning 
White – Over-heat warning 
Red – Low battery warning 
  
Warranty information 
 
For all warranty claims please contact the store you purchased from. 
The Core 2.0 power base is covered by a one year manufacturer warranty against defects. 
The Core 2.0 carry case is covered by a one year manufacturer warranty against defects. 
The atomizer is covered by a one week manufacturer warranty against defects. 
While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer. 

Crossing Core 2.0 | 2.1 Stargazer Side Mouthpiece Bubbler E-Rig Kit

Flat Top Round Bottom Quartz Banger Nail

 
-﻿2mm thickness
-19.5 outer diameter to fit 19.8/20mm coils
-Arm/Holder/Rest for coil
Length:74.5mm/Width: 29.6mm

 
Rig Joint Fitment Choices:
10mm,14mm,18mm male and female

https://discountenails.com/

Flat Top Round Bottom Quartz Banger Nail

Greenlightvapes TC Port Portable E-Nail Kit

 -Features an LED screen-

Technical Specifications:

Real-time temperature control and adjustment

300-800 degrees Fahrenheit range

Rechargeable battery/3000mAh

Auto-timer function

0.91" HD OLED display screen(123*32 dpi)

Friendly tone reminder 

Instructions:

    Load the battery. Press the power button 5 times to switch on/off the device
    When the device is on, press (+)/(-) button to adjust temperature from 300 degree Fahrenheit ~ 800 degree Fahrenheit adjustment. Long press the button to quickly adjust temperature by 10 degrees F.
    Press (+)and(-) buttons simultaneously to open the dishes selection interface. After the dishes selection screen pops up, press (+)/(-) button to select your choice of dishes and click the power button to confirm the dishes selection.
    Press the power button 3 times to start heating the device. Red light and single beep tone indicates the heating. Wait for 50seconds or as displayed in the screen to let the coil reach set temperature.
    As the device is heated the indicator light turns Green and a long tone indicate the device reached set temperature, and ready to vape.
    When the device is ready to vape, the interface stops from heating the coil after 50 seconds. Or you can press the power button 3 times to stop the interface from heating the coil.
    During battery charging, the red light indicates the device is charging, and turns green on charging is completed.
    The screen will be automatically powered off if the device is not used for 30 seconds. Press the power button 5 times to switch off the device
    Charging, short circuit, voltage are displayed in the screen.

 

Note: The different dishes on heating to a desired temperature might have a temperature difference of ±40F due to different elements in the dish and is normal.

Package  Includes:

1* TC Port with replaceable ceramic heating base

1* Magnetic stainless carb cap with removable dab tool

1* Rechargeable battery/3000mAh

1* Titanium nail

1* Ceramic nail

1* Quartz nail

1* Silicon nail

3* Q-tips

2* Alcohol pad

1* USB charger

1* Wax container

1* Glass bubbler

1* User manual

1* Gift box

* We sell replacement TC Port heating elements, glass, and nails on our website under accessories*

https://discountenails.com/

G9 Greenlightvapes TC Port kit Portable E-Nail

G9 Greenlightvapes TC Port kit Portable E-Nail For All Your Mobile Dabbing Needs. Features an LED Screen With the Ability to set the Exact Temperature 

Fancier Double Quartz E-Nail Kit  
The PID E-Nail controller box controls the hot runner heating coil. The controller will heat from room temperature to 710 degrees in about 3 minutes.
Temperature Range is 0-999 Degrees.
The coil is rated at 100W under 110VAC. It is a barrel shaped coil with 19.8mm inner diameter size and 20mm outer size. The heating coil is 59 inches in length with a black and yellow fire retardant sheath.
Please refer to the included user manual before operating.
The Quartz nails are 14/18mm male joints. The kit comes with a 14/18mm female adapter. This makes the nails a 4 in 1 fitment, which will fit most all rigs male and female.

 
Kit Includes:
1x PID Temperature Controller Box
1x Heating Coil
1x Power Cable
1x Quartz Banger Nail14/18mm Male
1x Straight Quartz Nail 14/18mm Male
1x 14/18mm Female Adapter
1x Quartz Banger Carb Cap
1x Straight Nail Carb Cap
1x Aluminum Case
2x Silicon Jars
1x User Manual
Fancier E-Nail Features:
Brand Name 	Fancier
Key Word 	Fancier Nail, Fancier E Nail, Fancier Nail
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature ~ 999°F
Temperature stability 	Around 5°F-7°F(depends on environment)
Quartz Nail with Adapter Joints: 	

14MM Male,18MM Male,14MM Female,18MM Female Joints 4 in 1
Coil Shaped 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	  3.5 x 1.5 x 5.0 inch (93x37x129mm)

https://discountenails.com/

Fancier Quartz Double E-Nail Case Kit

Fancier Quartz Double E-Nail Case Kit Comes With An All Quartz Setup. Features 2x Quartz Nails and Carb Caps. 

Wonderful Brand ABS Plastic Case E-Nail Kit

 
Options:
Case Color: Black/Orange/Blue/Wood/Camo
Coil&Nail Size: 10mm/16mm/20mm
Nail Type: Titanium/Quartz Hybrid
(Choose above)
 
The Electric Controller Nail Box Kit includes a PID temperature controller, heating coil, nail and carb cap. The PID controller is for controlling the hot runner heating coil. The controller will heat from room temperature to 710 degrees Fahrenheit in about 3 minutes.  The max temperature is 999 degrees Fahrenheit. The coil is rated as 100 W under 110 VAC.
 
The Nail configures into a 6 in 1 for universal fitment
(Fits male and female rigs- 10mm-14mm-18mm- Fits most all rigs)

 
Wonderful ABS Plastic Case E-Nail Kit Includes:
- 1 pc ABS Safety Case E-Nail Temperature Controller
- 1 pc Heating Coil
- 1 pc Grade 2 Titanium or Quartz Hybrid Nail(depending on choice)
- 1 pc Grade 2 Titanium Carb Cap
- 1 pc Power Cord
- 1 pc User Manual
- 2 pcs Silicone Containers 5ml Capacity

 
Wonderful E-Nail Specifications
Brand Name 	Wonderful
Wattage 	100W
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature~999 Degrees °F
Temperature stability 	Approximately 5°F-7°F
Heating Coil Sizes 	10mm, 16mm, 20mm
Coil Shape 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	 3.5 x 1.5 x 5.0 inch (93 x 37 x 129 mm)

https://discountenails.com/

Wonderful ABS Plastic Case E-Nail Kit

Wonderful ABS Plastic Carry Case E-Nail Kit With Inside Storage and Multiple Color Designs

Fancier E-Nail Quartz Banger Kit
Nail: 4 in 1 Quartz Banger Nail and Adapter
Case Colors: Camouflage or Black Carbon Fiber

Please note the coil inner diameter is only 19.8mm barrel shape
*Reaches 710 degrees in about 3 minutes*
*Temperature range is 0-999 degrees*

 

Every Kit Includes:

1x PID temperature controller Box

1x coil (19.8MM Only)

1x AC power cable(1.5m)

1x Quartz Nail (14&18MM Male Joint)

1x Quartz Carb Cap

1x Glass Adapter(14&18MM Female)

2x Silicone containers

1x Zipper Case

1x User Manual

 

 The quartz nail is both a 14MM and 18MM male joint in one

the glass adapter is a 14MM and 18MM female joint in one.

So every E-Nail kits quartz nail is a 4 in 1 and can fit for both 14MM & 18MM female and fale joints.

(Fits most all rigs!)

 
Fancier E-Nail Specifications:
Brand Name 	Fancier
Key Words 	Fancier Nail, Fancier E Nail, Fancier Nail
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature~999 Degrees °F
Temperature stability 	Approximately 5°F-7°F
Quartz Nail with Adapter Joints: 	14MM Male, 18MM Male, 14MM Female, 18MM Female Joints 4 in 1
Coil Shape 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	  3.5 x 1.5 x 5.0 inch (93x37x129mm)

https://discountenails.com/

Quartz Banger E-Nail Kit

Quartz Banger E-Nail Kit With a 4 in 1 Quartz Banger Nail and Adapter. Case Choices of: Camouflage or Black Carbon Fiber

Quartz Bowl Insert
(2x Inserts included)

 
Nail Size/Fitment: 16mm or 20mm
-Fits inside quartz nails
-Easier to remove and clean or replace

https://discountenails.com/

Quartz Bowl Insert

Electric E-Nail Kit

Colors: Camo/Wood/Blue Skulls/Yellow Camo/Black

Nail Choice: Titanium or Quartz Hybrid
Coil/Nail Size: 20mm/16mm/10mm Flat

Kit includes:
-Temperature Controller Unit
-Heating Cord/Coil (Fireproof Kevlar)
-Titanium Nail or Quartz Hybrid Nail with Bowl (Depending on Choice)
-Carb Cab
-Power Cord
-User Manual
-2x Silicone Containers (random color)
-Oil Tool
-Silicone Mat
-Zipper case

The controller will heat from 0-710 degrees in about 3 minutes. Max temperature is 999 degrees. The coil is rated at 110W under 110VAC. The heating coil is 59 inches long with black and white fire retardant weave. Please refer to the user manual before operating. The grade 2 titanium nail is a 6 in 1 designed to fit both female and male 10mm, 14mm, and 18mm rigs.
Fancier E-Nail Features:
Brand Name 	Fancier
Key Words 	Fancier Nail, Fancier E Nail, Fancier Nail
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature~999 Degrees °F
Temperature stability 	Approximately 5°F-7°F
Quartz Nail with Adapter Joints: 	14MM Male, 18MM Male, 14MM Female, 18MM Female Joints 4 in 1
Coil Shape 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	

  3.5 x 1.5 x 5.0 inch (93x37x129mm) 
  Approximate Size

https://discountenails.com/

Fancier E-Nail Kit Black/Camo/Wood/Blue Skulls/Yellow Camo

Fancier E-Nail Kit Black/Camo/Wood/Blue Skulls/Yellow Camo With Nail Choices of Titanium and Quartz Hybrid. Sizes 10mm, 16mm, 20mm. 

Fancier 25mm Axial Style Coil Quartz Banger Kit
Nail: 25mm Axial Style Quartz Banger Nail (Choose joint size)
Case Color: Black Carbon Fiber/Camouflage

Rig Joint Size Choices (Bottom of Nail):
10mm/14mm/18mm Male or Female

*Reaches 710 degrees in about 2-3 minutes*
*Temperature range is 0-999 degrees*

 
Includes:
  
1* Digital Temperature Controller 
1* Heating Coil (25mm/inner Diameter)
 1* Power Cable 1
* 25mm Quartz Nail (hoose your rig joint size) 
1* Glass Carb Cap 
1* Portable Carrying Case 
1* Instruction Manual
1* Metal nail/coil Fastener Clip
 

 
Fancier E-Nail Specifications:
Brand Name 	Fancier
Key Words 	Fancier Nail, Fancier E Nail, Fancier Nail
Voltage 	AC110V -240V 50-60HZ
Temperature Range 	Room Temperature~999 Degrees °F
Temperature stability 	Approximately 5°F-7°F
Quartz Nail
	25mm Coil Size With 10/14/18mm Male/Female Rig Joint Sizes
Coil Shape 	Barrel (Spiral) 
Length of coil 	1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type 	“K” type
PID Dimension/unit 	  3.5 x 1.5 x 5.0 inch (93x37x129mm) 
Approximate Size

https://discountenails.com/

Discount E-Nails

Discount E-Nails products