The Creators and Manufacturers of the Sampling Pods concept, along with a complete product line of innovative Store Displays designed exclusively for Cannabis Shops, Dispensaries and CBD Stores worldwide. 

We Ship Worldwide.

Bud Pod™

Canna-Pod®

Puffer Pod®

Bud Bar Displays®

Storage

“The Next Generation in Sample Pods”
Seals airtight to prolong freshness
Specially designed ‘Bud Post’ allows you to ‘Float that Choice Bud’ inside the Pod avoiding damage to the trichomes. In addition, it places the bud in the perfect position in the container for magnified viewing.
Aroma Hole Area allows for a large movement of air exchange inside the container to obtain the strains full aroma.
Aroma Plug seals the holes at the top of the container snugly to help maintain freshness.
Bud Pods are designed for ‘Tether Ready’ use. Order the optional tether’s now…or later.
To meet various State’s guidelines for sample compliance, we offer Anti-Tamper Security Seals (sold separately). The seal can be customized with your LOGO. The seals lay flat around the circumference of the Pod for a clean appearance.
A card Holder is built-in to the Bud Pod’s design. Place description cards back-to-back at the top of the container, allowing your budtenders to have their own ‘cheat sheet’!

The Canna-Pod® design is simple, clean, and includes popular features. Inter-Fitting Lid and Body create an Air Tight Seal that will keep your flower samples fresher, longer. The Aroma Area is very large for greater air exchange to fully appreciate the strains terpene signature. Aroma Plug – Used to seal Aroma Area to maintain freshness. Lens – For microscopic viewing of trichomes, etc. Seals – To meet various State’s guidelines for sample compliance (i502), we offer a reusable seal (sold separately). The seal can be customized with your LOGO. The seals lay flat around the circumference of the Pod for a clean appearance. Deep Capacity Pod – Holds up to 1/2 ounce of buds for sample display.
Choose Translucent Plugs or Black Plugs
Now choose between Translucent or Black Aroma Plugs when you place your Pod orders! No Extra Charge!


The Canna-Pod® design is simple, clean, and includes popular features.

Features:
Airtight Lid Seals
'Micro Holes' that block air movement until the puff button is depressed
Magnifier Lens
Humidity Tray 
Nug Spike
‘Tether Ready’

Bud Bar has created a new way of delivering your favorite terpene aromas to you with the introduction of the Puffer Pod®! This elegantly clean design uses simple physics to deliver a generous whiff of wonderful cannabis aromas without the need for a plug! The Puffer Pod® incorporates ‘Micro Holes’ that block air movement until the puff button is depressed. When depressed the Puffer Pod® then delivers a subtle wisp of terpene aroma. The Puffer Pod® also features a humidity tray which hides a Boveda® Humidity Control Pack underneath, allowing samples to stay fresher, longer. The tray, along with our trademark magnifier and nug spike, make this Pod a “Puffing Powerhouse”!

Both stands accommodate various sizes and shapes of pens and carts, in addition to having a small footprint, making them both versatile single unit displays.

Overall Dimensions – Cartridge Stand: 3¾” wide x 1¾” deep x 3” Tall.

Pen Stand: 3¾” wide x 3” deep x 5” Tall.

Xtract Pen & Cartridge Stand

The Xtract Pen & Cartridge Stand was created to allow for flexibility within any display case.

The stunning Dab Bar Cabinet™ can display a mind blowing 48 concentrate selections, each with their own description card area. The 6 display trays are inclined for an eye appealing viewing angle, as well as being individually removable from the cabinet for closer customer inspection. With this many dab choices your customers will have a hard time ‘concentrating’!

Cabinet Footprint: 47 ¼” wide x 15 ¾” deep x 16″ tall (without base).
20″ tall with the Standard LED base or 17″ with the Lo-Pro base.

Dab Bar Cabinet™

Photographers ‘Nug Spike’™
Take Great Nug Photos’!
Features:
A great tool for achieving perfect shots without the extra work.
Save editing time since your nug floats’ in the air.
Provides more shot angles.
Non-slip silicone feet.
Stable base and solid rod with 4” long Stainless Steel Pin.
Dimensions: 6” square base x 12” tall. 

Photographers ‘Nug Spike’™
Take Great Nug Photos’!

Photographers ‘Nug Spike’™

The Canna-Detri Pod™ design merges the many features of our Canna-Pod™ with those of our Bud-Detri™ dish to create a versatile Pod suitable for numerous applications.

Features:
Inter-Fitting Lid and Body. Create an air-tight seal on the container that will keep your flower samples fresher, longer.
Aroma Area. The aroma area of the container is very large for greater air exchange to fully appreciate the strains terpene signature.
Aroma Plug. The plug is used to seal the aroma area to maintain freshness. Plug comes in a standard style aroma plug and is also available as a pivoting aroma plug (optional). Choose the pivoting option to ensure your plug stays secured to the pod. Plugs are available in both black & clear. The black plug uses a black pivot screw & the clear plug uses a white pivot screw.
Magnifying Lens. Used for microscopic viewing of trichomes, etc.
Seals. To meet various State’s guidelines for sample compliance, we offer Anti-Tamper Security Seals (sold separately). The seal can be customized with your LOGO. The seals lay flat around the circumference of the Pod for a clean appearance.
Deep Capacity Pod. Container holds up to 1/2 ounce of buds for sample display; Inner detri dish holds 1/8 ounce of buds.
Tether Tab (optional). Choose the ‘Tether Tab’ option to be added to your Canna-Detri Pod™, this external tab allows the use of our ‘Eyelet’ Tether (sold separately) to mechanically screw fasten the Tether to your Canna-Detri Pod™.
The Canna-Detri Pod™ has standard inner & outer base-bottoms that are black or white, and we also offer a range of base color options.

Colored Options Allow You To:
Color code different strains.
Color code pricing.
Pod Dimensions: 3½” diameter x 2” height.

Detri Dish Dimensions: 2½” diameter x ⅞” height.

Canna-Detri Pod™

The Canna-Detri Pod™ design merges the many features of our Canna-Pod™ with those of our Bud-Detri™ dish.

The Xtract Pen & Cartridge Tray makes an elegant design statement while enhancing the appearance of your products on display. To kick it up a notch, add our LED light box, available in black or white, to illuminate the tray from below. The box produces cool white lighting which always adds that extra level of class.

Xtract Pen & Cartridge Tray

Designed to accommodate various sizes and shapes of pens and carts

A great choice for start-up shops or corporate meetings when reviewing professional displays for your company’s future success.

The Sample Pods Package includes one of each of our most popular pods for reviewing.

Set 1: 1 each of the Bud Goblet™, Bud Pod™, Canna-Pod™, Puffer Pod™, and Z-Pod™.

Set 2: Incline XtractPod™, XtractPod™, X-Pod™, and Sili’Pod™ (5g, 10g, 30g, and 50g sizes).

Set 3: All of the Above.

Sample Pods Package

Created by popular request, the Sample Pods Packages provide you with one of each of our most popular Pods at a discounted price.

arge card area (2” tall x 3 ½” wide) for your extract details. The Incline Display is designed with a pocket that holds the Removable 50g XtractPod™ allowing your card and Pod to be displayed at the perfect viewing angle.

Cost includes Stand and 50g Xtract-Pod™ with silicone liner.

Overall dimensions: 3 ½” wide x 5 ¼” deep x 2” tall. (including Pod height).

Incline XtractPod™

Large card area (2” tall x 3 ½” wide) for your extract details. The Incline Display is designed with a pocket that holds the Removable 50g XtractPod™ 

The Flower Pod™ uses our ‘Bud Goblet™’ cup on a simple stand for a super clean look.

Choose black or white matte stand with or without pivoting aroma plug option.

Dimensions: 3” wide x 2 ¾” deep x 4” tall.

Flower Pod™

The Locking Ring adds the next level of security. Using Torx head screws to lock the lid to the body (Includes a Torx wrench for your access).
The Humidity Tray (Optional) hides the Humidity Control Pack and includes a Nug Spike.
Using the Humidity Tray in conjunction with the Humidity Control Pack will save your store thousands of dollars per year by extending the life of your samples. Our own tests showed a 2 1/2 times extended life of nugs for both aroma and appearance.

Locking Ring Canna-Pod™ and Humidity Tray 

The Z-Pod™ Features:

Inter-Fitting Lid and Body – Creates an Air Tight Seal on the container that will keep your flower samples Fresher, Longer.
Lens – For microscopic viewing of trichomes, etc.
Aroma Plug – Used to seal the Aroma Area of the container to maintain freshness. Can also be branded with your custom logo.
Nug pin’– Suspends the sample for perfect viewing.
Sign Holder – This makes strain information/details easy to read for the Consumer.
Matte Black Finish ¬ For a sleek look that repels fingerprints.
Seals – To meet various State’s guidelines for sample compliance, we offer Anti-Tamper Security Seals (sold separately). The seal can be customized with your LOGO. The seals lay flat around the circumference of the Pod for a clean appearance.
Tether Ready – The Z-Pod™ is designed for ‘Tether Ready’ use. Order the optional tether’s now…or later.

Our materials are certified Food Grade!
Accept No Substitutes.
Keep your customers safe.
Food grade acrylic will not contaminate your product.

Z-Pod™

Bud Bars newest cannabis container, the Z-Pod™, unifies the best elements of our other flower pods into an amalgamation that is beyond compare.

Professionally display all of your products in a very attractive and efficient unit. The Bud Bar Cabinet™ is our premium cannabis display case. The cabinet is constructed using beautiful 1/2″ glass green acrylic side panels, all tempered glass components are beveled and polished. Designed specifically for our pods’s, the cabinet features 3 tiered levels for display. The lighted counter pedestal uses LED light modules which produce virtually no heat.

Bud Bar Cabinet™

Professionally display all of your products in a very attractive and efficient unit. Is our premium cannabis display case. 

Perfect for powering your LED displays at off site events and shows!
Our 12V/8300mAh battery has been matched to all our LED displays giving you independent power when no electricity is available.

Battery Features:
Power outlets for cables.
USB outlet to charge your personal devices.
Lighted power level gauge.
On/off switch.
Includes:
Wall Charger.
Male to Male cable.
Female to Dual Male Splitter.
Approximate Illumination Times:
Xtract and Vape Displays: 6 to 7 hours.
Xtract Elite: 5 to 6 hours.
24″ Bud Bar Cabinet: 3 to 4 hours.
48″ Bud Bar Cabinet: 2 to 3 hours.

Battery for LED Portable Power

Perfect for powering your LED displays at off site events and shows!

Security Tether Bar™
“Give your customers freedom to explore strains while under secured control.”
Features:
Secures 6 sampling containers using dual barrel locks – keyed alike.
The top portion of the tether bar unlocks and separates from the bottom portion, along with the attached Pods, for easy storage; this makes for quick and simple openings and closings.
Adjustable tether ‘collar’ for slack control.
Durable. Tethers are made from aircraft grade SS cable with metal eyelets.
4 stock ﬁnishes to choose from: Black Matte, White Matte, Burl Faux Finish, & Marble Faux Finish.
The Metal Eyelet Tether is for use with all versions of the: Bud Pod™, Puffer Pod®, Flower Pod™, and Bud Goblet™.

For all versions of the Canna-Pod® you must add the Optional Tether Tab.
For all versions of the Sensory Pod™, Z-Pod™, and X-Pod™ you must add the Optional Tether Block.
Mounting Methods: The tether bar can be mounted with either the provided 3M ‘perma-mount’ tape or via the mounting holes with provided screws.

Dimensions: 29” wide x 3 ½” deep x 2 ½” tall

Additional Custom Faux Finishes are available to match your store decor, contact us for further details.

*NOTE: Pods are not included.

Security Tether Bar™

“Your solution to easily locking sample containers on display.”

Bud Pod Bar™
A Lot of Display Area In A Small Foot Print!
The Bud Pod Bar™ display is lit by cool white LED’s that produces a beautiful white/blue hue. Highly efficient and a very eye appealing way to display all your strains of flowers. Each shelf is 3 ¾” deep and nicely accommodates our various Pods and other items for display.

The Bud Pod Bar™ is designed to sit on a counter. Main body material is black ABS, which never shows fingerprints.

The Metal Eyelet Tether is for use with the Bud Goblet™, Bud Pod™, Locking Ring Bud Pod™, Puffer Pod®, Puff-X Pod™, and Flower Pod™. Can also be used with the Canna-Pod®, Locking Ring Canna-Pod™, and Canna-Detri Pod™ with the Optional Tether Tab or the Sensory Pod™, Z-Pod™, and X-Pod™ with the Optional Tether Block.

Footprint Dimensions: 24″ wide x 12″ deep (front to back) x 12″ tall.

*NOTE: Pods are not included.

**The listed price may vary, please visit our website for all the available options. 

Bud Pod Bar™

Very Organized • Professional • Great Medical Appearance
A perfect viewing angle and LED lighting allow you to display flower using a variety of Pods, including the Canna-Pod®, Bud Pod™, or the Puffer Pod®. The display’s business card size pockets let you create your own insert cards to detail the displayed strains information. The unit is also available with either a non-tethered or tethered design.

The Metal Eyelet Tether is for use with the Bud Goblet™, Bud Pod™, Locking Ring Bud Pod™, Puffer Pod®, Puff-X Pod™, and Flower Pod™. Can also be used with the Canna-Pod®, Locking Ring Canna-Pod™, and Canna-Detri Pod™ with the Optional Tether Tab or the Sensory Pod™, Z-Pod™, and X-Pod™ with the Optional Tether Block.

The Adhesive Mounting Pad Tether is for use with the Canna-Pod®, Locking Ring Canna-Pod™, and Canna-Detri Pod™ without the Optional Tether Tab or the Sensory Pod™, Z-Pod, and X-Pod™ without the Optional Tether Block.

Footprint: ~46 ¾” wide x ~5 ⅛” deep (front to back) x ~6 ½” tall.

Flower Bar™

Perfect viewing angle and LED lighting with business card size pockets allow you to use your own jars and create your own insert cards with information.

Please Note Minimum Order Quantities:
Standard Seals: Clear w/ ‘Compliant Sample’ (repeating) – Minimum Order is 12 seals per sheet, (.75 cents per seal)
Custom Seals: (brand your product with your Logo): Minimum order is 72 seals, (.90 cents per seal)
Custom Seals 1st time order. There is a one-time artwork set-up fee of $45.00.
Compliant Sample Seals are available in two options: standard seals or custom seals (brand your product with your Logo). Both our standard and custom seals are printed on the same quality material; these are not thin, flimsy stickers. If you’re interested in custom seals, please call us to discuss details.

What’s Great About Our Sample Seals?
No-Residue Vinyl. We’ve tested many!
Strong sealing adhesive. These will last more than one use.
To Order Colored Seals:
For a Colored Seal, let us know the color in the order notes, we can do any color.

Anti-Tamper Security Seals

What’s Great About Our Sample Seals? No-Residue Vinyl. We’ve tested many! Strong sealing adhesive. These will last more than one use.

Features:
Torx Head screws are used to lock the lid to the body (Includes a Torx wrench for your access).
Seals airtight to prolong freshness.
Specially designed Bud Spike allows you to ‘Float that Choice Bud’ inside the Pod avoiding damage to the trichomes. In addition, it places the bud in the perfect position in the container for magnified viewing.
Aroma Holes allow for a large movement of air exchange inside the container to obtain the strains full aroma.
Aroma Plug seals the holes at the top of the container snugly to help maintain freshness. Also available as a Pivoting Aroma Plug (Optional): choose the pivoting option to ensure your plug stays secured to the pod. Plugs are available in both Black & Clear. The black plug uses a black pivot screw & the clear plug uses a white pivot screw.
Magnifying Lens for microscopic viewing of trichomes, etc.
Designed for ‘Tether Ready’ use. Order the optional tether’s now, or later.
A card holder is built-in to the Locking Ring Bud Pod™ design. Place description cards back-to-back at the top of the container, allowing your budtenders to have their own ‘cheat sheet’.

Locking Ring Bud Pod™

The Locking Ring Adds the Next Level of Security.

Each Gimbal Pod® features its own security tether ‘Drawer’ that unlocks and detaches from the stationary ‘Home Box’. The ‘Home Box’ remains secured to your table or counter making night close-ups and nug changes quick and easy.

When the ‘Drawer’ is locked into the ‘Home Box’, the Gimbal Pod® rests on its pedestal at the perfect viewing angle. As the gimbal cup is lifted from the pedestal, the security tether feeds out 3’ of cable which allows customer freedom to view, smell, & enjoy!

Use the Gimbal Pod® sign holder for providing the information needed to help with your customers purchasing selection.

Overall Dimensions: 4” wide x 3¾” deep x 5½” high.

Gimbal Pod®

A unique Pod combination with a lot of punch!

The X-Pod™ Features:

Screw Top Lid and Threaded Body – Creates an Air Tight Seal on the container that will keep your extract samples Fresher, Longer.

Sign Holder – This makes strain information/details easy to read for the Consumer.

Matte Black Finish – For a sleek look that repels fingerprints.

Seals – To meet various State’s guidelines for sample compliance, we offer Anti-Tamper Security Seals (sold separately). The seal can be customized with your LOGO. The seals lay flat around the circumference of the Pod for a clean appearance.

Tether Ready – The X-Pod™ is designed for ‘Tether Ready’ use. Order the optional tethers now…or later.

X-Pod™

Bud Bars newest cannabis container, the X-Pod™, unifies the best elements of our other extract pods into an amalgamation that is beyond compare.

Large card area (3-1/2” x 5”), for laying out your comprehensive strain information.

The Incline Display is designed with a pocket that holds the Removable Canna-Pod™ allowing your strain card and Pod to be displayed at the perfect viewing angle.

Cost includes Stand and Canna-Pod™

Overall dimensions: 5” wide x 8-1/2” depth x 4” tall (including Pod height).

Pod Dimensions: 3 ½” Diameter by 2 5/16” H

Incline Canna-Pod™

The Incline Display is designed with a pocket that holds the Removable Canna-Pod™ allowing your strain card and Pod to be displayed at the perfect viewing 

Sensory Pod™

Inter-Fitting Lid and Body create an Air Tight Seal that will keep your flower samples Fresher, Longer.
Aroma Area of the container is very large for greater air exchange, to fully appreciate the strain’s terpene signature.
Aroma Plug – Used to seal the Aroma Area of the container to maintain freshness.
Lens – For microscopic viewing of trichomes, etc.
Double Sided Sign Holder – This makes strain information/details easy to read for the Consumer and Budtender. (Uses standard business card stock.)
Seals – To meet various State’s guidelines for sample compliance, we offer Anti-Tamper Security Seals (sold separately). The seal can be customized with your LOGO. The seals lay flat around the circumference of the Pod for a clean appearance.
Deep Capacity Pod – Container holds up to 1/2 ounce of buds for sample display.
Dimensions: 3 5/8” wide x 5 1/4” depth x 4” height.

Bud Bar Displays®

Weed boxes, bong cases, rig cases, & pipe cases